CGR-30P Engine Analyzer – Premium Package

The Main Screen displays the Tachometer and Manifold Pressure in large analog arcs at the top of the instrument, providing immediate and quick reference values. The digital display provides accuracy in monitoring engine functions.

Contact sales for pricing and availability

Category:

Description

CGR-30P Engine Analyzer
Premium Package

FAA TSO’d & STC’d
EASA STC’d & TCCA STC’d

w/ RPM + 5 add’l Primary Functions,
and up to 5 Non-Primary Functions

FAA Approved Primary Replacement

  • Remove Old Engine Instruments. RPM, Manifold, EGT/CHT, Fuel Level, Oil Pressure and More
  • Upgrade Your Aircraft Panel With The Best Engine Analyzer Available

Easy To Install

  • CGR-30P Fits Into Existing 3 1/8″ Hole (remove your old tach).
  • Engine Data Converter (EDC) Accepts all inputs. Only 2 wires run to the back of the instrument.

Accurate, Dependable & Easy To Use

  • Electronics International has consistently been the leader in digital engine instrumentation since 1979.
  • Designed and built in the USA.

Data Recording of Every Flight

  • All monitored functions are stored up to three times per second.
  • Up to 1,500 most recent flights stored, downloaded via USB

The Main Screen displays the Tachometer and Manifold Pressure in large analog arcs at the top of the instrument, providing immediate and quick reference values. The digital display provides accuracy in monitoring engine functions.

For aircraft without a constant speed prop, pilots may choose to display Fuel Flow instead of Manifold Pressure on either of the two arcs at the top of the instrument, creating an open space below the arcs to monitor an additional function on the Main Screen.

The CGR Main Screen also features a complete, Primary Replacement EGT/CHT Bar Graph Engine Analyzer. Each engine cylinder is monitored by the CGR. If any engine temperature rises above or below programmed limits, the CGR provides an immediate alert. The EGT/CHT Bar Graph Analyzer features both Lean-of-Peak and Rich-of-Peak Modes for easy engine leaning. The CGR-30P will let you know as each cylinder peaks, at what temperature each cylinder peaks, and how far below Peak Temperature each cylinder is operating.

To the Right of the EGT/CHT Bar Graph Analyzer, the CGR-30P displays three STC’d, Primary Replacement Engine Instruments of your choice. Choose between several options, including Fuel Pressure, Oil Pressure, Oil Temperature, TIT, Volts, Fuel Level(s), Vacuum, and more.

EGT/CHT Bar Graph

The CGR-30P features a state-of-the-art, full-color bar graph to assist with ROP/LOP leaning. Additionally, the bar graph provides both “normalized” and digital readout screens. No other bar graph in the industry comes close to providing the number of options the CGR-30P offers.

The Bar Graph can be easily “Normalized” to create a baseline from which to monitor in- flight engine temperature changes. When Normalized, all EGT or CHT bars will be displayed as equal in height. If any cylinder’s EGT or CHT changes in relation to the other cylinders, that cylinder’s bar height will no longer be shown at the same height as the others. Such information can be an essential indicator of engine problems.

The Secondary Screen is intended to display functions which do not need to be displayed continuously. This Screen will display a red (warning) and/or yellow (caution) numerical value for a Primary Function of your choice. This function will also annunciate between the arcs on whichever Screen you’re viewing if a limit is violated. The red and/or yellow range annunciators directly under the arcs on the Secondary Screen will blink to alert the pilot of any potential problem with a primary function on the Main Screen.

Fuel Management

  • Displays Estimated Fuel Remaining Based on Fuel Flow.
  • Displays Fuel Used for Flight and Since Last Fill-Up.
  • May Enable You to Extend Your Flight Time Using a Number of Fuel Management Tools.

GPS Interface

  • Ties Into Panel or Yoke-Mounted GPS.
  • Displays Distance and Time To Empty.
  • Stores GPS Data in Its Recorded Flight Log.

The Fuel Data Screens provide six sets of data based on Fuel Flow and GPS information. This data includes Range, Distance to Destination, Range After Reaching Destination, Fuel Remaining, Fuel to Destination, Fuel Reserve, Time to Empty, Time to Destination, Time Reserve, Fuel Used for the Flight, Fuel Used Since Fuel Was Added, Economy (MPGs) and Total Fuel Onboard. Much of this data depends on an RS232 connection to your GPS.

This Screen allows you to download Flight Data to the USB Data Stick and set the Data Sample Rate. The Data Sample Rate is the time interval between recorded data. The CGR-30P can record up to 1500 flights before it records over the oldest flight first. The USB port may be found mounted in the instrument panel or hanging under it. Flight Data is recorded and downloaded in a comma delimited format. This allows the file to be ported directly into Excel.

CGR-30P Premium Package Retail Prices

Included: RPM, EGT/CHT Bar Graph, Fuel Remaining, Fuel Used, GPS/Fuel Flow Data, Engine Time & Tach Time.

Included (Pick Five): Manifold Pressure, Oil Pressure, Oil Temperature, Fuel Flow, Fuel Pressure, Right Fuel Level, Left Fuel Level, Aux Fuel Level, TIT VAC, Volts and Carbon Monoxide Detector.

Optional (Pick up to Five): OAT (n/c), HP (n/c), Flight Timer (n/c), Local Time (n/c), Zulu Time (n/c), Hydraulic Pressure ($250), G-Meter ($495), Carb Temp ($95), Amps ($39), Second Amp Measurement ($195).

Additional Options:

ADC-1 Automatic Dimming Control Sensor ($79.95), CP-1A External Display Intensity Control ($39).

CGR-30P Premium 4-Cylinder Engine Package (w/Probes & Cables): $4,217 Retail (+ depending on options)

CGR-30P Premium 6-Cylinder Engine Package (w/Probes & Cables): $4,714 Retail (+ depending on options)

CGR-30P Specifications

Dimensions: 3.25” x 3.25” x 4.45” Deep, 3 1/8” Flush Mount

Weight: 1.1 Pounds

Power Requirements: 7.5 to 30 Volts
Typical: 0.2 amps @ 12 Volts, 0.1 amps @ 24 Volts

Display: Active Matrix, Sunlight Readable

Backlight: Fully Dimmable for Night Flights

USB Port: Data Download and Software Updates

Internal Storage: Up to 1,500 most recent flights stored. All monitored functions are stored up to three times per second. Recorded flight data can be easily downloaded via USB port.

Certifications: FAA STC’d as Primary Replacement
FAA TSO’d to DO-160G
FAA DO-178 Level C
Transport Canada Civil Aviation (TCCA) Validated STC
European Aviation Safety Agency (EASA) Validated STC

Engine Data Converter (EDC-33P) Specifications

Dimensions: 5.85” x 3.71” x 2.35” Deep

Weight: 1 Pound

Power Requirements: 7.5 to 30 Volts, 0.1 Amps (Typical)

Certifications: FAA TSO’d to DO-160G and DO-178 Level C

Input Configuration: 1 Volt Channel, 1 Amp Channel, 1 Fuel Flow Channel, 6 Pressure Channels, 17 Temp Channels, 4 Resistive Fuel Level Channels, 4 Capacitive Fuel Level Channels and 2 RPM Channels.